Feature
Boosted AI Performance in a compact size: Delivers up to 157 TOPS AI performance by NVIDIA® Jetson™ Orin™ NX 16GB module in Super/MAXN mode.
Rich Interfaces for Robotics: Including dual RJ45, M.2 slots for 5G/Wi-Fi/BT modules, 6x USB 3.2, 2x CAN, GMSL2, I2C, and UART, functioning as a powerful robotic brain.
Industrial-Grade Power and Thermal Design: Operates reliably from –20 °C to 60 °C in 25 W mode and up to 55 °C in MAXN mode, fueled through a wide 19–54 V DC input, ensuring stable operation in mobile and industrial robot environments
Software~ready Ecosystem: Pre~installed with JetPack 6.2 and Linux BSP for seamless deployment. Combined with Isaac Sim, it can be used to create autonomous mobile robots (AMRs), arms and manipulators, humanoids, and more.
Ready-to-use GMSL Extension: Provides ready-to-use GMSL extension that supports multiple GMSL cameras in Jetpack
Jetson Modules Performance with Super Mode
Enhanced power management
Improved higher frame rate processing
Reduced inference time
Module |
|
| reComputer Robotics J4012 |
|
Applications Processor(AP) | NVIDIA Jetson Orin™ NX 16GB |
|
AI Performance | Orin NX 16GB – 157 TOPS (MAXN) |
|
GPU | 1024-core NVIDIA Ampere architecture GPU with 32 Tensor Cores |
|
GPU Max Frequency | 1173 MHz |
|
CPU | 8-core NVIDIA Arm® Cortex A78AE v8.2 64-bit CPU 2MB L2 + 4MB L3 |
|
CPU Max Frequency | 2.0 GHz |
|
DL Accelerator | 2 x NVDLA v2.0 |
|
DL Max Frequency | 1.23 GHz |
|
Vision Accelerator | 1 x PVA v2.0 |
|
Memory | 16GB 128-bit wide LPDDR5 DRAM 102.4GB/s |
|
Power | 10W - 15W - 25W - 40W |
|
Video Encode | 1x 4K60 (H.265) 3x 4K30 (H.265) 6x 1080p60 (H.265) 12x 1080p30 (H.265) |
|
Video Decode | 1x 8K30 (H.265) 2x 4K60 (H.265) 4x 4K30 (H.265) 9x 1080p60 (H.265) 18x 1080p30 (H.265) |
|
CSI camera | Up to 4 cameras (8 via virtual channels) 8 lanes MIPI CSI-2 D-PHY 2.1 (up to 20Gbps) |
|
Mechanical | 69.6mm x 45mm 260-pin SO-DIMM connector |
|
Carrier Board |
|
Storage | 1x M.2 KEY M PCIe |
|
|
Networking | M.2 KEY E | 1x M.2 Key E for WiFi/Bluetooth module |
|
|
M.2 KEY B | 1x M.2 Key B for 5G module |
|
|
Ethernet | 2x RJ-45 Gigabit Ethernet |
|
|
I/O | USB | 6x USB 3.2 Type-A (5Gbps) 1x USB 3.0 Type-C (Host/DP 1.4) 1x USB 2.0 Type-C (Device Mode Only for Reflash/Debug) |
|
|
CAN | 2x CAN0 (XT30(2+2)) 3x CAN1 (4-Pin GH-1.25 Header) |
|
|
Display | 1x DP1.4 (Type C Host) |
|
|
UART | 1 x UART 4-Pin GH-1.25 Header |
|
|
I2C | 2x I2C 4-Pin GH-1.25 Header |
|
|
Fan | 1x 4-Pin Fan Connector (5V PWM) 1x 4-Pin Fan Connector (12V PWM) |
|
|
Extension Port | 1x Camera Expansion Header (for GMSL2 board, included) |
|
|
RTC | 1x RTC 2-pin (3V) 1x RTC Socket (3V, CR1220 no included) |
|
|
LED | 3x LED (PWR, ACT and User LED) |
|
|
Pinhole Button | 1x PWR 1x RESET |
|
|
DIP Switch | 1x REC |
|
|
Antenna Hole | 5x Antenna Hole |
|
|
Power | 19-54V XT30(2+2) (XT30 to 5525 DC Jack Cable included) |
|
|
Jetpack Version | Jetpack 6.2 |
|
|
Mechanical | Dimensions (W x D x H) | 130mm x 120mm x 66mm |
|
|
Weight | 1100g |
|
|
Installation | Desk, Wall-mounting |
|
|
Operating Temperature | -20℃~60℃ (25W Mode) -20℃~55℃ (MAXN Mode) (with reComputer Robotics heat sink with fan) |
|
|
Warranty | 2 Years |
|
|
Certification (Pending) | RoHS, CE, FCC, KC |
|
|
Hardware Overview
Humanoid Robot & Manipulation：
Serving as a powerful brain for humanoid robots, the reComputer Robotics series delivers rich perception with precise motion control. Emulating human-like sensing, dexterity, mobility and whole-body coordination—seamlessly collaborating with people to get tasks done.
Autonomous Robots, AMRs/ AGVs/ Logistics Robots：
The CAN bus links servos or motors to drive Robotic Arms and Autonomous Robots with millisecond-level joint coordination.
Logistics Robots map in seconds via UART LiDAR, dodge on the fly and shuttle racks nonstop.
I²C weaves temperature, humidity, IMU and fuel-gauge data into a net, giving robots early-maintenance alerts.
USB cameras scan barcodes while on the move, and a USB ticket printer labels parcels in real time—zero manual labor from inbound to outbound.
Dual-RJ45 link-aggregation delivers video to the Edge AI reCopmputer in <1 ms for real-time QC and remote monitoring.
| HSCODE | 8471504090 |
| USHSCODE | 8517180050 |
| UPC |
|
| EUHSCODE | 8471707000 |
| COO | CHINA |
Items | Quantity |
Jetson Orin™ NX 16GB module | x 1 |
Seeed Carrier Board (reComputer Robotics J401) with GMSL Extension | x 1 |
128GB NVMe SSD | x 1 |
Aluminum Case and Heatsink with Fan | x 1 |
USB Cable; Type A to Type C | x 1 |
XT30 to DC cable | x1 |
User Manual | x 1 |
GMSL2 cameras can be used with NVIDIA Jetson-based systems that integrate a compatible GMSL2 serializer/deserializer and Mini-FAKRA/FAKRA interfaces. At Seeed, we offer NVIDIA Jetson-based devices with built-in GMSL support, such as the reComputer Robotics J4012 and J3011 "with GMSL" configurations, which allow you to directly connect supported GMSL2 cameras. For custom designs, our reServer Industrial J501 carrier board for Jetson AGX Orin can be combined with a suitable GMSL extension board to support multiple GMSL camera inputs.
total 0 Sheet，Only 5 images can be uploaded, each less than 5m.